Hingmed Medical successfully passed the CE Unannounced Inspection
Recently,Hingmed successfully passed the CE Unannounced Inspection and was unanimously approved by the auditors, especially in terms of the safety and reliability of the fully automatic medical electronic blood pressure monitor (model DBP-01P) Outstanding.
Four levels of protection, safe and worry-free
The first thing to do is product safety testing. In order to prevent the patient from the discomfort and injury caused by sleeve’s excessive contraction.Hingmed automatic electronic blood pressure monitor equipped with a four-fold protection mechanism for the system.
The multiple "safety valves" from software to hardware to machinery greatly ensure the controllability and safety of the cuff inflation process.
The first step is controlled by the algorithm of the blood pressure module. When the setting exceeds 290mmHg, the pressure protection will be turned on, and the solenoid valve will automatically open to release the excess gas in the cuff.
The second protection is during the sleeve inflation process, the system will automatically monitor the pressure of the sleeve airbag and the motor current, if it exceeds the set pressure and current range, the system will automatically reset.
The third protection is a stop device built into the mechanical structure. Once the cuff contraction reaches the critical point, the mechanical stop device will be locked, preventing the cuff from shrinking without the lower limit.
The fourth emergency stop device adds another layer of flexibility to the above triple protection. In case of emergency, you can stop the device with one button. And the internal power supply of this device, even in extreme situations such as power failure, can still control the cuff to release pressure.
200,000 times of aging test is only to ensure blood pressure monitor’s stability and reliability
Except the excellent performance on safety performance test,Hingmed automatic electronic blood pressure monitor also performed well in the following reliability test.
As the core component of the electronic blood pressure monitor, the design of the blood pressure module is the top priority of the entire product. The traditional blood pressure module uses a single air pump, if it is used continuously, it will cause heat, which will cause greater loss of the air pump, and affect the service life and stability.
Realizing this drawback, Hingmed automatic blood pressure monitor
innovatively equipped with two air pumps, which are imported from Japan. And use algorithm optimization to realize the alternate use of the two air pumps. In this way, from the perspective of stability and lifetime, the optimization of multiples is realized, and the service life of a single air pump is greatly extended.
“The design life of the Hingmed automatic electronic blood pressure monitor is 200,000 times, and the service life is 100,000 times, so as to ensure that users can use it for five years without problems. Our lifetime test prototype runs every 2 minutes and has been running for 10 months. Now it still working,” The operations manager, Mr. Jiang Lianwu introduced to us